?

Log in

No account? Create an account
 
 
19 June 2008 @ 05:55 pm
Tab binding tip #1 - do everything backwards!  


Here's the almost-finished binding... almost finished because I've done things in an unusual order.

(Yes, brass eyelets. My client isn't willing to wait for a lottery win before she can order a pair of period-correct stays with handstitched lacing holes. Call it Rococopunk if you like. Which is different, incidentally, from Rococo Puffs.)

When you make a jacket, you mess with making pockets before you put the jacket together, right? Because it's easier to do the fiddly bits when you can do them on one smaller piece only, without having to wrestle the whole garment into submission.



So tip number one for binding stays is: bind 'em, then put 'em together, and then complete the binding over the joins.

Here's how I did the side seams after the boning and binding was already in place:


1. Take out the two bones at the side seams. You'll notice I didn't stitch through all the layers on these bones, so now I can pull back the top fashion fabric layer and sew the lining/coutil inner part together with linings together.

2. After pressing that seam open and grading it, the back fashion fabric is laid over the top and pinned down. Then I can turn it over and sew down the ditch made by the side seam.

3. Having made a line of stitching on the top, now I can fold the edge of the front section back and pin down along the stitching line.

4. Finally, the edge is slipstitched down by hand.


So now I have to bind over the joins, finish the straps (which will be totally detachable) and we're done!


Above, the outside in black wool; below, the inside in Chinese blue cotton.
 
 
 
Cathy Haypeacockdress on June 20th, 2008 06:54 am (UTC)
Thank you!

Yes, I've been saving Rococo Puffs up for a good moment. :)